Hari Om Traders

• Sine Wave Inverter
• Capacity 900 VA, Rated Power 756 W
• Supports single battery
• 24 Month Warranty
• Safe for sensitive appliances with Sine wave out-put.
• Three Stage Charging for safe & efficient charging and longer battery life. 4-step battery type selection.
• Equipped with overload protection with auto reset
• Special designed for Indian power conditions with rugged technology design for high performance and longer back-up time.
• replace ECO With UPS and UPS with ECO Mode.
• Noiseless Operations with the help of low harmonic distortion
• Supports wide battery range, i.e. Flat Plate, Tubula:-r & VRLA (SMF)

Description:-

• Sine Wave Inverter
• Capacity 900 VA, Rated Power 756 W
• Supports single battery
• 24 Month Warranty
• Safe for sensitive appliances with Sine wave out-put.
• Three Stage Charging for safe & efficient charging and longer battery life. 4-step battery type selection.
• Equipped with overload protection with auto reset
• Special designed for Indian power conditions with rugged technology design for high performance and longer back-up time.
• replace ECO With UPS and UPS with ECO Mode.
• Noiseless Operations with the help of low harmonic distortion
• Supports wide battery range, i.e. Flat Plate, Tubular & VRLA (SMF)

Pure Sine Wave output:-
Delivers pure sine wave output thereby ensuring safety of your appliances. Appliances run without noise and last longer.

Supports all Battery Types:-
The UPS supports all types of batteries like flat plate, tubular, VRLA, SMF - gives you the flexibility to choose from a wide range of batteries.

ABCC technology:-
Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life.

ECO & UPS mode:-
In UPS Mode, output voltage is kept in range of 180V to 260V - ensuring safety of sensitive appliances such as computers. In Eco Mode, voltage range is extended thereby reducing battery usage.

The Product:-
Sinewave UPS SEBz / SWE² is a electronic power source which stores the energy in battery/batteries connected to it when the AC source is present and converts this energy automatically to AC power when the Input AC source fails and automatically feeds generated AC power to the loads connected & returns to mains when the AC source comes back on the input side.

Features:-
Micro Controller / Dsp Based Digital Sinewave Ups SEBz / SWE² are designed using latest state-of-the-art Technology for Better Performance and High Reliability. The Digital Sinewave Technology used enhances the life of the battery and minimum effort has to be put for maintenance.

• Pure Sine Wave Output.
• PWM Controlled multistage ATM (Automatic Trickle Mode) Charging.
• Display Indications (Status & Fault)
• Smart Overload Sense and Short Circuit Protection
• Easily Serviceable
• Auto Reset Feature
• Mains Input Voltage Range Selection. 

Front Panel:-

• Mains ON
• UPS on Backup
• Battery Charging
• LED Continuously Glows when Charged.
• LED Blinks when Battery is Charging
• Fuse Blown
• UPS Overload
• Battery Low

Back Panel:-

• Mains Input Lead for AC input
• Circuit Breaker (7Amp for UPS SEBz 600 / UPS SWE² 625 models, 10Amp for Sinewave UPS SEBz 850 / UPS SWE² 875 model, & 15 Amp for Sinewave UPS SEBz 1500 / 2000 / UPS SWE² 1550 model.) for Mains overload/ Short Circuit Protection.
• Output socket for load.
• Fuse (10Amp. Slow Blow) for UPS.
• (+) Positive Battery Lead
• (-) Negative Battery Lead
• Slide Switch for Mains Input Voltage Range Selection
• Slide Switch to Select the Maximum Charging Voltage

Trouble Shooting:-

• Dead wall socket. Line AC input connections are loose / not proper. 
• Check Glass Fuse at the rear. If blown change it to 10Amp ratting. If fuse still blows call authorised service engineer.
• Check Circuit Breaker/Glass fuse at the rear. Please reset the circuit breaker, or if the fuse is blown, replace it with 10Amp rating fuse. If Circuit Breaker trips or fuse blows again, call electrician to check shorting in the load wiring.
• Reduce the load and turn the reset switch on the front panel ON-OFF-ON.
• Battery has discharged. Recharge the battery after the mains restoration.
• Check the wiring and reduce the load and turn the reset switch on the front panel ON-OFF-ON.
• Check battery water and charge the battery with mains minimum for 8-12 hours. If still less backup, get the battery checked up from authorised service personnel.
• Check the battery connections and the mains connections.
• ) Internal problem. Bypass the UPS as explained in next section and call authorised service personnel.
•  AC Glass fuse blown. Check the fuse at the rear and replace if blown.

Bypassing the UPS:-

• Use a two way bypass switch externally & Simply make it ON to Bypass Mode.
• Alternatively the UPS can be bypassed by connecting the O/P plug (which connects the load to the UPS) directly to the socket on the wall from where the UPS input has been taken. Care must be taken to ensure that the UPS-ON SWITCH has been switched off in order that the battery does not discharge.

To bypass the UPS follow the following steps: -

1. Remove input plug from the wall socket,
2. Remove output plug from the UPS’s output socket, 
3.  Insert output plug into the wall socket. 

Description:-

• 150 Ah Rated Capacity @ C10, 12V
• Warranty - 60* Months
• Tubular plate Technology - Next generation tall tubular battery with better charge acceptance and long Back up
• Long cycles (1500 @80% DOD, 5000 @ 20% DOD), ensuring design life
• Longer life without discharge with self-discharge rate of 3% per month STC.
• Efficient battery with Higher AH efficiency > 90%, and WH efficiency > 80%
• Low maintenance with a topping frequency of 8-10 months, low maintenance with level indicators
• Manufactured with high corrosion resistant and robust spine technology using the advanced and state-of-the-art HADI high pressure (at 100 bar) spine casting machines, which ensure a super fine grain structure, for strength, long life and highest reliability
• Designed with thicker positive plates and 20% more electrolyte to withstand power outage

Features:-

• Spines manufactured using HADI high pressure casting machine for long life
• Tubular plate construction for extremely long life and superior performance
• Extra-strong, flexible oxidation-resistant gauntlet for extremely long life
• Extremely high purity, corrosion-resistant spine alloy composition ensures longer battery service life
• Highly puncture-resistant polyethylene separator for higher reliability
• Plates designed for improved charge acceptance